watch tool shop swiss kubik bergeon elma motion mte spring bar plier watch movements

No items!
 

Phone +49 551 2912390

watch tool watchwinder winder parts movements bergeon horotec beco

Mon - Fri

 GMT 9-12 + 14-18 h

Watch repair tools and watch winder Bergeon Elma MTE Boxy Swiss Kubik Horotec Beco watch parts
Watch winder
Module / Kit's
Uhrmacherwerkzeug und Uhrenbeweger Shop Attrezzi per orologi Scarica Bergeon Elma MTE Beco RICAMBI E COMPONENTI  utensileria per orologiai attrezzo Watch winder winders watch tools  movimentadores para relógios ferramentas de relojoeiro
Uhrenwerkzeug / Uhrmacherwerkzeug Onlineshop Outil Horloger Remontoir pour montres france suisse
Uhrmacherwerkzeug Österreich Herramientas UTILES RELOJERIA Útiles de Relojero watch winder reloj Bergeon Swiss Kubik Underwood Beco MTE Elma S1

Watch Winders kits, spare parts and accessories

New watch winder modules MTE WTM SILENT
MTE watch winder modules WTM, made in germany - The module is suitable for individual or multiple use, preferred installation position 12° inclination backwards reversing mode or optional left / right run, duration of one cycle 72 seconds (rotation and break time), power supply via battery compartment or mains-plug transformer (adapter), as from 5 stations we recommend our central control, here each station can be programmed individually, low current consumption, very low-noise run. Dimensions: h 100, w 120, d 60 mm. (Battery compartment and mains-plug transformer is not incl.) Size: 12cm x 10cm x 5,7cm.
Price: EUR 169.63/Pcs. incl. VAT plus Shipping
DUMMY watch winder module MTE WTM
This is a watch winder module dummy MTE WTM for installation in a watch winder box, furniture or safes for additional storage hand winding watches or quartz watches. Delivery without cushion (additional accessory).
Price: EUR 49.56/Pcs. incl. VAT plus Shipping
WTA watch winder assembly set
WTA assembly set is a watch winder module. This module is equipped with the new drive. Preferred mounting position: 12° backwards. Holding position for the watch is in the centre over shaft Ø 5 mm. Dowel pin Ø 3 mm. Cable set switch / electrical bed plate, power jack / battery clips soldered. Cycle: manual selection of direction, stop cycle about 65 seconds, Position of switch: Left -0- Right, Connected load: 3 V DC. Weight: 155 grams.
Price: EUR 89.99/Pcs. incl. VAT plus Shipping
iXpresio POWER 2 DIY watch winder kit
For watch collectors looking for something unique: the high-quality "plug and play" iXpresio POWER 2 DIY watch winder kit. It contains: a prefabricated mounting plate with two "silent" modules, each with their own interval motor with right, left and bidirectional rotations, programmable to 1248, 960 or 672 turns per day, supplied with a compatible power supply unit and watch cushions. Build your own high-performance watch winder with the latest technology. Easy assembly for all in a watch-winder case, cabinet or safe. Dimensions: 390 x 141 x 103mm (lxhxd), cup diameter: 84mm.
Price: EUR 179.99/Pcs. incl. VAT plus Shipping
iXpresio POWER 3 DIY watch winder kit
For watch collectors looking for something unique: the high-quality "plug and play" iXpresio POWER 3 DIY watch winder kit. It contains: a prefabricated mounting plate with three "silent" modules, each with their own interval motor with right, left and bidirectional rotations, programmable to 1248, 960 or 672 turns per day, supplied with a compatible power supply unit and watch cushions. Build your own high-performance watch winder with the latest technology. Easy assembly for all in a watch-winder case, cabinet or safe. Dimensions: 580 x 141 x 103mm (lxhxd), diameter: 84mm.
Price: EUR 259.99/Pcs. incl. VAT plus Shipping
Luxury watch winder DIY kit S1 LIFE STYLE
Luxury watch winder DIY kit S1 LIFE STYLE for winding up to 4 automatic watches simultaneously. Delivery incl: • digital display • soft touch control board • circuit-board • remote control • 4 ultra quiet motors with pot and 4 adjustable cushion is suitable for watches with a strap or bracelet circumference of 17cm to 24cm • all cables • power adapter. Rotation can be set to clockwise, anti-clockwise or to alternate, turns per day: 650, 750, 850, 1000 or 1950. This DIY watch winder kit is perfect for installation in furniture or in a self-built watch winder housing. Dimensions: pott: 93-94mm (depth 120mm), control panel: 90x22mm, display: 60x22mm.
Price: EUR 299.99/Pcs. incl. VAT plus Shipping
Watch winder kit MTE BASE 3 DIY
For watch collectors looking for something unique: high quality MTE BASE 3 DIY watch winder kit. Includes 3 silent build in modules with flocking, each with its own motor and control unit, power adapter plus watch cushions incl.. Build your own high performance watch winder with German technology. Easy installation into watch winder housing, safe or cupboard.
Price: EUR 569.76/Pcs. incl. VAT plus Shipping
Watch winder kit MTE BASE 6 DIY
For watch collectors looking for something unique: high quality MTE BASE 6 DIY watch winder kit. Includes 6 silent build in modules with flocking, each with its own motor and control unit, power adapter plus watch cushions incl.. Build your own high performance watch winder with German technology. Easy installation into watch winder housing, safe or cupboard.
Price: EUR 1119.99/Pcs. incl. VAT plus Shipping
Watch winder kit MTE BASE 9 DIY
For watch collectors looking for something unique: high quality MTE BASE 9 DIY watch winder kit. Includes 9 silent build in modules with flocking, each with its own motor and control unit, power adapter plus watch cushions incl.. Build your own high performance watch winder with German technology. Easy installation into watch winder housing, safe or cupboard.
Price: EUR 1629.99/Pcs. incl. VAT plus Shipping
MTE Professional 3 DIY watch winder kit
For watch collectors looking for something unique: the high-quality "plug and play" MTE Professional 3 DIY watch winder kit. It contains: a prefabricated mounting plate with three "silent" modules with flocking, each with their own motor, supplied with a compatible power supply unit and watch cushions. Build your own high-performance watch winder with German technology. Easy assembly for all in a watch-winder case, cabinet or safe.
Price: EUR 749.99/Pcs. incl. VAT plus Shipping
MTE Professional 6 DIY watch winder kit
For watch collectors looking for something unique: the high-quality "plug and play" MTE Professional 6 DIY watch winder kit. It contains: 2 prefabricated mounting plates each equipped with three "silent" modules with flocking, each with their own motor, supplied with a compatible power supply unit and watch cushions. Build your own high-performance watch winder with German technology. Easy assembly for all in a watch-winder case, cabinet or safe.
Price: EUR 1399.99/Set incl. VAT plus Shipping
MTE Professional 9 DIY watch winder kit
For watch collectors looking for something unique: the high-quality "plug and play" MTE Professional 9 DIY watch winder kit. It contains: 3 prefabricated mounting plates each equipped with three "silent" modules with flocking, each with their own motor, supplied with a compatible power supply unit and watch cushions. Build your own high-performance watch winder with German technology. Easy assembly for all in a watch-winder case, cabinet or safe.
Price: EUR 1999.99/Set incl. VAT plus Shipping
ORIGINTIMES V3 watch winder kit
The modules of the renowned Bugatti watch winder represent the technical cutting edge. The high-quality "plug and play" ORIGINTIMES V3 watch winder kit: it contains one prefabricated mounting plate with three top-quality "silent" modules (including power supply unit and all connecting cables), ready for immediate assembly behind a timber, metal or leather-covered wall. Technical data: construction with the narrowest module diameter in the world as well as a high-performance engine and chrome-plated frames. The inside of the holding cup and the watch cushions are all made of real leather. Robust axle bearings to safely and smoothly rotate even the most difficult watches. The cup bearing is only mounted on double ball bearings on one axis of rotation, ensuring frictionless and extremely quiet operation. A slipping clutch on a belt drive prevents gearbox damage through manual rotation and stopping. Maintenance-free, durable drive unit. Electronic control for precise movement cycles. A retro-reflective sensor ensures exact stopping for the cup, and also ensures that the watch is always in the same position.
Price: EUR 1799.99/Pcs. incl. VAT plus Shipping
ORIGINTIMES V6 watch winder kit
The modules of the renowned Bugatti watch winder represent the technical cutting edge. The high-quality "plug and play" ORIGINTIMES V6 watch winder kit: it contains two prefabricated mounting plates each equipped with three top-quality "silent" modules (including power supply unit and all connecting cables), ready for immediate assembly behind a timber, metal or leather-covered wall. Technical data: construction with the narrowest module diameter in the world as well as a high-performance engine and chrome-plated frames. The inside of the holding cup and the watch cushions are all made of real leather. Robust axle bearings to safely and smoothly rotate even the most difficult watches. The cup bearing is only mounted on double ball bearings on one axis of rotation, ensuring frictionless and extremely quiet operation. A slipping clutch on a belt drive prevents gearbox damage through manual rotation and stopping. Maintenance-free, durable drive unit. Electronic control for precise movement cycles. A retro-reflective sensor ensures exact stopping for the cup, and also ensures that the watch is always in the same position.
Price: EUR 3599.99/Pcs. incl. VAT plus Shipping
ORIGINTIMES V9 watch winder kit
The modules of the renowned Bugatti watch winder represent the technical cutting edge. The high-quality "plug and play" ORIGINTIMES V9 watch winder kit: it contains three prefabricated mounting plates each equipped with three top-quality "silent" modules (including power supply unit and all connecting cables), ready for immediate assembly behind a timber, metal or leather-covered wall. Technical data: construction with the narrowest module diameter in the world as well as a high-performance engine and chrome-plated frames. The inside of the holding cup and the watch cushions are all made of real leather. Robust axle bearings to safely and smoothly rotate even the most difficult watches. The cup bearing is only mounted on double ball bearings on one axis of rotation, ensuring frictionless and extremely quiet operation. A slipping clutch on a belt drive prevents gearbox damage through manual rotation and stopping. Maintenance-free, durable drive unit. Electronic control for precise movement cycles. A retro-reflective sensor ensures exact stopping for the cup, and also ensures that the watch is always in the same position.
Price: EUR 5299.99/Pcs. incl. VAT plus Shipping
Complete rotary switch for MTE WTM Modul
Complete rotary switch for the MTE WTM SILENT watch winding module: On/Off-switch, right, left and both incl. AC adapter connection.
Price: EUR 45.87/Pcs. incl. VAT plus Shipping
Control-Unit with LED for MTE WTM watch winder modules
Control-Unit with LED-Signal for MTE WTM and WTR watch winder modules. Options 1: TPD approx. 650 / 850 / 950 rotations within 12 hours (+12 hours off-time). Options 2: off / left rotation / right rotation / reversing rotation (alternating left rotation and right rotation). Options 3: express winding (continuous rotation without interruption).
Price: EUR 79.99/Pcs. incl. VAT plus Shipping
MTE battery holder
MTE battery holder for watch winder modules WTM or WTA.
Price: EUR 4.99/Pcs. incl. VAT plus Shipping
MTE watch retaining cushion WTM modul
MTE watch retaining cushion for WTM modul, black velvet, high quality - made in germany.
Price: EUR 9.99/Pcs. incl. VAT plus Shipping
MTE power adapter
MTE power adapter for WTM or WTA Modul, 100-240V.
Price: EUR 18.50/Pcs. incl. VAT plus Shipping
Replacement motor for watch winder MTE WTS 4 230V
Replacement motor for watch winder MTE WTS 4 220-240 V.
Price: EUR 74.99/Pcs. incl. VAT plus Shipping
MTE double metal spring WTA/WTB
MTE double-metal-spring for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series).
Price: EUR 29.99/Pcs. incl. VAT plus Shipping
MTE double metal spring WTA/WTB black
MTE double-metal-spring black coated for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series).
Price: EUR 29.99/Pcs. incl. VAT plus Shipping
MTE WTA/WTB double spring, clear
MTE double-spring, transparent with black base for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series).
Price: EUR 29.99/Pcs. incl. VAT plus Shipping
MTE SMALL double metal spring WTA/WTB
MTE SMALL double-metal-spring black for ladies-watches or watches with short strap, coated for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series).
Price: EUR 32.17/Pcs. incl. VAT plus Shipping
MTE single metal spring WTA/WTB
MTE single-metal-spring for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series).
Price: EUR 18.99/Pcs. incl. VAT plus Shipping
MTE single metal spring WTA/WTB black
MTE single-metal-spring black coated for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series).
Price: EUR 18.99/Pcs. incl. VAT plus Shipping
MTE watch holder WTA for watches without straps
MTE watch holder WTA for two watches without straps. For all watch winder from the WTA and WTB Series.
Price: EUR 69.99/Pcs. incl. VAT plus Shipping
MTE metal spring for WTS 4 series
MTE metal spring for WTS 4 series.
Price: EUR 19.99/Pcs. incl. VAT plus Shipping
MTE black metal spring for WTS 4 series
MTE metal spring, black color, for WTS 4 series.
Price: EUR 22.83/Pcs. incl. VAT plus Shipping
MTE golden metal spring for WTS 4 series
MTE metal spring, 24k gold plated, for WTS 4 series.
Price: EUR 35.96/Pcs. incl. VAT plus Shipping
MTE spring for WTS 4 series, clear
MTE spring, transparent, for WTS 4 series.
Price: EUR 19.99/Pcs. incl. VAT plus Shipping
MTE rubber coated metal spring for WTS 4 series
MTE black rubber coated metal spring, for WTS 4 series.
Price: EUR 23.99/Pcs. incl. VAT plus Shipping
MTE SMALL black metal spring for WTS 4
MTE SMALL metal spring for ladies-watches or watches with short strap, black color, for WTS 4 series.
Price: EUR 19.99/Pcs. incl. VAT plus Shipping
MTE SMALL metal spring for WTS 4 XS-M
MTE SMALL metal spring for ladies-watches or watches with short strap, for WTS 4 series.
Price: EUR 23.81/Pcs. incl. VAT plus Shipping
MTE watch holder WTS 4 for watches without straps
MTE watch holder WTS 4 for watches without straps. For all watch winder from the WTS 4 Series.
Price: EUR 49.99/Pcs. incl. VAT plus Shipping
MTE rubber support plate
MTE rubber support plate for all MTE springs.
Price: EUR 4.29/Pcs. incl. VAT plus Shipping
MTE 0-ring for WTS 4 rollers
MTE O-ring for WTS 4 rollers (WTS 4 springs).
Price: EUR 4.50/Pcs. incl. VAT plus Shipping