WATCH TOOLS

Watch Opening
Kit
Waterproof / water resistant watch case opener with its best companion, the four pin clampable holder.

These tools are needed even to change batteries in many watches.

This opener and holder set will open about 85% of all the screw back watch cases in existence.

Also included is the snap style watch case opener.

Rolex
Opener
Stand up style opener for Rolex watch cases that clamps to a bench vise. This opener comes complete with six dies with the measurements of 29.50mm +
28.30mm + 
26.50mm + 
22.50mm + 
20.20mm + and
 18.50mm

Rolex
Opener
Hand held opener for Rolex watch cases. This opener comes complete with six dies with the measurements of 29.50mm + 28.30mm + 26.50mm + 22.50mm + 20.20mm + and 18.50mm

Electric Magnetizer
Demagnetizer
Made by Procraft, this tool is easy to use and very effective 

Watch Crystal +
Back Press
Glass fitting press for fitting mineral watch crystals. Also used for pressing down on stubborn snap watch backs when replacing batteries. Comes with 12 dies. This is a push down style press, screw down press is also listed on this page.

This tool is extremely useful when it comes to many of the modern watch cases that are a very tight fit such as the ones on Movado or Fossil watches. 

 Movement
Trays
6 Sturdy movement trays that have lids that snap on and allow these to be stacked. Keeps the unfinished movement safe and organized until it can be completed.

Crystal Inserter
Remover
For front entry watches, this tools removes the crystal on front entry watches so the movement can be removed and serviced.

Aluminum
Watch Holder
This is a clampable watch holder that helps in removing a screw off back.
 The four pins on this unit are adjustable to watch case sizes.

Plunger Style
Hand Remover
Removes hands in a straight upward motion as to not bend them.
.
During the process of attempting to remove the hands, often enough the struggle will increase the hand hole diameter to the point of having them to loose upon reinstallation. This tool prevents this because of its direct pull in a upward motion on the strongest part of the watch hands. This style remover is best for larger watches.

5 Prong Pocket
Watch Keys
Most encountered pocket watch key sizes all on two 5-prong keys.

Link Remover /
Band Pin Pusher
Great tool for removing links on new watches. 
.
This tool removes the excess links easily with its 3 sized pins to push the band pins out in a straight and steady motion with no scratches or scuffs.

9 Precision
Screwdrivers
Set of nine precision screwdrivers set in an organized wooden box.

 
Hand Holding
Tool
This unique tool is used to hold watch hands to broach the center holes bigger. Although it is not available to view in the picture, this tool opens to clamp the watch hand centered with one of its selection of hole diameters. This enables the watchmaker to increase the diameter of the hand hole to a ideal diameter that will fit the watch. 

Item #WT23--$29
 

 
Compartments in
Wood Box
This wooden organizing box contains aluminum compartments with see through lids to keep parts organized and visible all at once.

Link
Removing Kit
The watch band goes into the slot in the wood, then the pin tool gets lined up with the pin of the watch band, then the hammer taps this until the watch pin is removed and the links are separated.

5pc Tweezers
Set
Stainless steel tweezers set of various shapes and lengths.

Dent
Removing Kit
Doming block with two punches along with a wooden hammer.

This is used to remove dents in watch cases by aligning the case with the proper concave portion of the block, then tapping the dent out with the taps and hammer.

The block has 6 different concave sizes.

Air
Pump
Dry balances without moisture. Blows direct and steady flow of air to the part to be dried after cleaning.

Spring
Bar Tool

Bar Tool Nickelled spring bar tool with large and small forks on opposite ends. 
.
.Style may vary

Pocket Watch
Keys
Set of 14 pocket watch keys that cover every size out there.
 
 

Automatic
Watch Oiler
Proper amount of oil applied easily with the control that a automatic oiler offers.

Pin Vise
Set
Set of 4 pin vises with capacities from .0mm to 4.65mm. 

Hand
Installer
Hand installer that has a center spring for quick return. This includes a set of various sized bits to fit many sized hands and hand posts.

Set of 25
stakes
Set of 25 stake punches that are hardened and tempered.

Movement
Holders
Supports your work in a position that the center hand shaft and the small second shaft will not get bent from the table underneath.

Presto Style
Hand Remover
Removes hands in a straight upward motion as to not bend them.

During the process of attempting to remove the hands, often enough the struggle will increase the hand hole diameter to the point of having them to loose upon reinstallation. This tool prevents this because of its direct pull in a upward motion on the strongest part of the watch hands.

Pocket Watch
Opener
This is a opener for twist off pocket watch case backs. This can be used on pocket watches that are too tight to take off by hand.
 
Movement
Holder
Holds a variety of movements securely during operation.

Micrometer
.
Micrometer Reading
0 - 25 mm. This tool is used for many measuring tasks in watch and clock repair.

Orange
wood
Orange wood has unique properties that make it very useful to clean pivot holes. Sharpen the peg wood to a point and spin it in pivot holes to clean the old oil out.

Crystal
Cement
Great for cementing  crystals.

Case
Knife
Perfect size for opening snap back watch cases.

 The handle material may vary between wood and plastic.

 www.uhrmacher24.de